Anatolian Lattice Sconce — Laser-Cut Panel with Crystal
The Anatolian Lattice Sconce combines a laser-cut lattice panel at the back with vertical crystal rods at the front; light is refracted through the crystal and then passes through the lattice, giving the wall two layers of pattern at once.
International price
Price
€64.15
Product code: GP-APL-AND
Description
The Anatolian Lattice Sconce brings two materials together in a single body: a metal panel cut with a lattice motif at the back, and vertical crystal rods at the front. That pairing lets the piece read as traditional and contemporary at the same time.
The path of the light is layered too. It is first refracted and scattered by the crystal, then passes through the lattice behind and reaches the wall. The result is a depth of shadow that single-layer sconces cannot produce: bright points and geometric motif appear on the wall together.
At 40 × 14 × 14 cm this is a full, generous piece that carries wide walls and tall entrance halls. Gold, Silver and Rose build a classical richness alongside the crystal; Black and Antique move the same form into a quieter, more contemporary register.
Works the moment you open the box
The sconce arrives pre-assembled and ready to light. LED bulbs, a 9V battery, two wall plugs with screws and a spring terminal are all in the box — there is nothing else to buy. The on/off switch sits on the body, so you can control the light without a wall switch or a socket nearby.
As easy to fit as hanging a picture
Used with the battery, the wall needs no electrical work at all: two plugs, two screws, done. If you later want it hardwired, unplug the battery from its connector and wire the fitting to your mains using the spring terminal supplied. That flexibility is what makes this a real option for renters and for walls that are already finished.
Technical Specifications
| Brand | Gökyüzü Panel |
| Product type | Decorative wall sconce (up & down light) |
| Power | Battery (cordless) or mains — both built in |
| Dimensions | Height 40 cm × Width 14 cm × Depth 14 cm |
| Wattage | 9 W (2 × LED bulbs included) |
| Bulbs | LED bulbs included — fitted at the factory |
| Battery | 9V battery included in the box |
| Switch | On/off switch on the body |
| Body | Metal (powder-coated / plated finish) |
| Materials | Laser-cut metal lattice + crystal rods |
| Finishes | Gold · Silver · Rose · Black · Antique |
| In the box | Sconce (pre-assembled) · LED bulbs · 9V battery · 2 wall plugs + 2 screws · spring terminal |
| Installation | Screws to the wall — no wiring needed when used with the battery |
| Where to use | Indoor — entrance hall, living room, hotel lobby, restaurant |
| Dimensional tolerance | ±1 cm (handmade) |
| Made in | Türkiye |
| Warranty | 2 years |
Usage & Warnings
Use and care
- The fitting is designed for indoor use. Do not install it in a shower area, on an exterior wall, in a garden or anywhere exposed directly to moisture.
- Wipe the metal body with a dry, soft cloth. Abrasive sponges, bleach, solvents and alcohol-based cleaners dull the finish permanently.
- On models with crystal or acrylic parts a damp cloth is enough; dry immediately afterwards. Avoid hard water, which leaves limescale marks.
- Always switch the fitting off before cleaning or changing a bulb; on mains power, also switch off at the consumer unit.
Power and battery
- When wiring to the mains, disconnect the battery from its connector first.
- Use LED bulbs matching the socket type and never exceed the stated wattage.
- A weak battery does not cut out suddenly — the light dims gradually. Replace it with a new 9V cell of the same size.
- We recommend having the mains connection made by a qualified electrician. Faults caused by incorrect wiring are not covered by the warranty.
Installation
- The wall plugs supplied are for brick and concrete. Use plasterboard fixings on stud walls.
- Mounting it above eye level (roughly 160–180 cm from the floor) gives the up-and-down light its best effect on the wall.
- Before drilling, make sure there is no electrical cable or water pipe behind the wall.
Dimensions and finish
- These are handmade pieces; dimensions may vary by ±1 cm.
- Depending on your screen calibration, the finish may look slightly different from the photographs.
Frequently Asked Questions
Is the crystal real crystal?
Optical crystal rods are used; it is not lead crystal. They do the job of refracting light and adding sparkle, while being lighter and more robust than lead crystal — an advantage in something mounted on a wall.
What pattern appears on the wall?
Two layers: the crystal refracts light into bright points, and the lattice behind casts geometric shadows. Both layers read clearly on a flat, pale wall.
Is 14 cm too deep?
It is a comfortable volume for wide walls and entrance halls, but it can be intrusive at shoulder height in a narrow corridor. For tight spaces, choose the 6 cm deep Opal Tube or Slim models.
How do I clean the crystal?
Wipe with a soft, damp cloth and dry immediately. Do not use hard water, which leaves limescale marks, and avoid chemical glass cleaners — they can damage the metal finish.
Can I order in bulk for a hotel lobby?
Yes. Contact us for per-unit pricing on projects and bulk orders. We recommend confirming stock and lead time in advance — these are handmade, so larger quantities may need production time.
Customer Reviews
Reviews from verified buyers only
All ratings and comments here come from customers who ordered the product from our store, so every review reflects a real purchase experience.
If you have ordered this product, sign in to your account to write your review.
No published reviews for this product yet.
Questions & Answers
No questions have been asked about this product yet. Be the first to ask!
