Magnetic Track Spotlights
Magnetic track lighting is a low-voltage system in which the fixtures sit on the track by magnet. What sets it apart from a classic track spot is that a fixture can be lifted off by hand and repositioned anywhere along the track: when the furniture layout changes, the lighting changes with it — no electrical work required. The system has three parts and all three must match: the track, the fixtures that clip into it, and the driver that feeds the track. Magnetic tracks do not run on mains voltage but on low DC voltage (commonly 48V); they therefore need their own driver, and the driver's output must be rated above the combined load of every fixture on the track. The track type determines the installation. Surface-mounted track is fixed directly to the ceiling and is the fastest solution on an existing ceiling. Recessed and trimless tracks are set into a plasterboard ceiling; because they finish flush with the surface they give a cleaner look, but they must be planned together with the plasterboard work. When choosing fixtures, beam angle is decisive: narrow-beam spots highlight a picture or a worktop, while wide-beam units provide general lighting. Combining different beam angles on the same track is the most practical way to build both ambient and accent lighting on a single line.
Related Categories
Frequently Asked Questions
Can I add fittings later?
Yes — as long as the power supply has the capacity, adding a new fitting to the track takes minutes.
Are tracks and fittings from different brands compatible?
In magnetic systems the track profile and the contact layout vary between manufacturers; the track and the fittings must be chosen from the same system.
Can it be dimmed?
If the light is to be dimmed, both the power supply and the fitting must support it; compare the labels before choosing LED remotes and controllers.













































