Seljuk Lattice Wall Sconce — Laser-Cut Geometric Pattern
The Seljuk Lattice Wall Sconce is a 50 cm fitting whose laser-cut geometric metal body turns light into a projected pattern across the wall; it runs on a 9V battery with no wiring, or hardwired to your mains.
International price
Price
€83.80
Product code: GP-APL-SLC
Description
The Seljuk Lattice Wall Sconce carries a traditional geometric motif onto a laser-cut metal body. The octagon-and-star pattern on its surface is not decoration alone; it is a working mask that decides where the light gets out. When the fitting is lit, the pattern spreads across wall and ceiling and the room becomes a field of motif.
At 50 cm this is a tall, confident piece. Even unlit it reads as a panel on the wall — one of very few sconce types that also works during the day. It holds its own as a focal point in an entrance hall, a hotel lobby, a restaurant wall or a classic living room.
The vocabulary of the motif suits classic, oriental and ethnic schemes best. Gold and Silver brighten the pattern and sharpen the shadow; Rose leaves a warmer reflection; Black and Antique push the motif forward and the body back.
Works the moment you open the box
The sconce arrives pre-assembled and ready to light. LED bulbs, a 9V battery, two wall plugs with screws and a spring terminal are all in the box — there is nothing else to buy. The on/off switch sits on the body, so you can control the light without a wall switch or a socket nearby.
As easy to fit as hanging a picture
Used with the battery, the wall needs no electrical work at all: two plugs, two screws, done. If you later want it hardwired, unplug the battery from its connector and wire the fitting to your mains using the spring terminal supplied. That flexibility is what makes this a real option for renters and for walls that are already finished.
Technical Specifications
| Brand | Gökyüzü Panel |
| Product type | Decorative wall sconce (up & down light) |
| Power | Battery (cordless) or mains — both built in |
| Dimensions | Height 50 cm × Width 8 cm × Depth 8 cm |
| Wattage | 9 W (2 × LED bulbs included) |
| Bulbs | LED bulbs included — fitted at the factory |
| Battery | 9V battery included in the box |
| Switch | On/off switch on the body |
| Body | Metal (powder-coated / plated finish) |
| Finishes | Gold · Silver · Rose · Black · Antique |
| In the box | Sconce (pre-assembled) · LED bulbs · 9V battery · 2 wall plugs + 2 screws · spring terminal |
| Installation | Screws to the wall — no wiring needed when used with the battery |
| Where to use | Indoor — entrance hall, living room, hotel lobby, restaurant |
| Dimensional tolerance | ±1 cm (handmade) |
| Made in | Türkiye |
| Warranty | 2 years |
Usage & Warnings
Use and care
- The fitting is designed for indoor use. Do not install it in a shower area, on an exterior wall, in a garden or anywhere exposed directly to moisture.
- Wipe the metal body with a dry, soft cloth. Abrasive sponges, bleach, solvents and alcohol-based cleaners dull the finish permanently.
- On models with crystal or acrylic parts a damp cloth is enough; dry immediately afterwards. Avoid hard water, which leaves limescale marks.
- Always switch the fitting off before cleaning or changing a bulb; on mains power, also switch off at the consumer unit.
Power and battery
- When wiring to the mains, disconnect the battery from its connector first.
- Use LED bulbs matching the socket type and never exceed the stated wattage.
- A weak battery does not cut out suddenly — the light dims gradually. Replace it with a new 9V cell of the same size.
- We recommend having the mains connection made by a qualified electrician. Faults caused by incorrect wiring are not covered by the warranty.
Installation
- The wall plugs supplied are for brick and concrete. Use plasterboard fixings on stud walls.
- Mounting it above eye level (roughly 160–180 cm from the floor) gives the up-and-down light its best effect on the wall.
- Before drilling, make sure there is no electrical cable or water pipe behind the wall.
Dimensions and finish
- These are handmade pieces; dimensions may vary by ±1 cm.
- Depending on your screen calibration, the finish may look slightly different from the photographs.
Frequently Asked Questions
How large is the projected pattern?
It depends on the distance to the wall and the ceiling height; in a typical installation the pattern covers an area two to three times the size of the body. It reads most clearly on a flat, pale wall — texture or dark paint softens it.
Does it look good unlit?
Yes, and that is what sets this model apart. The laser-cut body works as a decorative panel even when it is off, so it earns its place during the day as well.
Is it suitable for hotels and restaurants?
It is, and it is often specified for those projects. Contact us for project pricing on larger quantities. The fitting is for indoor use and must not be installed on open terraces or exterior walls.
Why is this model more expensive than the others?
The body is laser-cut, and the deburring, straightening and plating that follow the cut are all done by hand. The labour is well above the other models, and the price reflects that.
Why is this model more expensive than the others?
The body is laser-cut, and the deburring, straightening and plating that follow are all done by hand. The labour is well above the other models and the price reflects that.
Customer Reviews
Reviews from verified buyers only
All ratings and comments here come from customers who ordered the product from our store, so every review reflects a real purchase experience.
If you have ordered this product, sign in to your account to write your review.
No published reviews for this product yet.
Questions & Answers
No questions have been asked about this product yet. Be the first to ask!
