Plasterboard TU Ceiling Track — 3 m, 0.35 mm
The perimeter track of a plasterboard ceiling. Fixed level to the wall, it receives the ends of the TC furring channels.
International price
Description
Plasterboard is a facing material; the frame behind it carries the load. The logic is the same everywhere: the U profile (DU, TU) is fixed to floor, ceiling or wall and sets out the frame, and the C profile (DC, TC) drops into it to form the member the board is screwed to.
Width decides two things at once — how tall the partition can go and how thick the insulation inside it can be. Material thickness (0.35–0.50 mm) decides how well the profile resists buckling: a thin profile needs closer supports, a thicker one holds a flatter surface with fewer.
Technical Specifications
| Profile type | TU (ceiling track) |
| Length | 3 m |
| Material thickness | 0.35 mm |
| Material | Galvanised steel |
| Matching profile | TC |
| Warranty | 24 months |
Frequently Asked Questions
What spacing should the studs have?
600 mm is standard: a 1200 mm board then lands on three studs and its joints fall on a member. Where heavy loads will be hung, this drops to 400 mm.
Can I cut the profile myself?
Yes, with tin snips or a profile shear. An angle grinder is not advised — the heat burns the galvanised coating and rust starts at that point.
Customer Reviews
Reviews from verified buyers only
All ratings and comments here come from customers who ordered the product from our store, so every review reflects a real purchase experience.
If you have ordered this product, sign in to your account to write your review.
No published reviews for this product yet.
Questions & Answers
No questions have been asked about this product yet. Be the first to ask!
